DollsArtCats

I had this Delf body that was structurally sound, but had all kinds of scratches, chips, and a really well done but IMO unfortunate breast removal...I have had it explained to me that you can't buy genderless bodies, and people like the posing of the Delf bodies. But I think it throws off the proportions of the Delf body to remove the breasts-- and you can always buy a cheap boy body and mod it.. well, anyway, this body needed a lot of work. and I thought if I made it a robot/cyborg thing the dent and scratch part of it would be OK. If you are going to use iDyePoly, you will need: --Paper towels already torn off and put where you can reach them fast, in a pile. Lots of them --mask off your drainboard and ceramic sink --Safety goggles or glasses--you will be working with a giant pot of splashy dye. Boiling dye. You       don't want that in your eyes. --A giant cheap Goodwill pot in good condition, especially the bottom and the handles--you don't want the w...

Yes, it's another iDyePoly project; Minylicious aka Mint did the dyeing with some changes from my method--the time in the dye bath was only 5 minutes for the pieces, but the pot and the centaur parts were carefully prepped first. I don't think Mint did a final scrub or sealing afterwards, but because the dye pigment was essentially strained first there may have been no residue to worry about. (My biggest headache with the iDyePoly, besides the smell, was the dissolvable container for the dye--it does melt but there is this awkward transition phase when the thing is melted but still wandering around like a blob of rice noodle.) Here's the article on Tumblr: http://mintyliciousbjd.tumblr.com/post/149608709449/my-first-dye-job-soom-pyrol-unicenta-years-ago In case you aren't on Tumblr and can't access the article, here's a clip of the dye process: Dye Method: Before continuing further, I created a dye concentrate in hot water then allowed the mixture to ...

I was determined to get Danu (Sicktress' Deesse head) onto a matching color body that wasn't peeling (the acrylic paint was just coming right off again), and my last attempts at dyeing this body on the barbeque side burner weren't too successful. So I bought a packet of iDyePoly brown: No mess... hah.  This time I did several things right--I did it on a nice day with the windows open, I scrubbed all the pieces clean, I got a bigger pot than the previous attempt , I put the pieces on stiff wire to keep track of them in the pot, and I put a project china bowl in the bottom of the pot to keep the pieces from direct contact with the bottom of the pot, where the fire was--and I stirred the pot for all thirty minutes the pieces were submerged, just like I was making some kind of bizzare custard, with the flames on low and the pot not quite boiling. Here is the pot: The spoon was a loss--the iPoly packet tells you not to use things you will be cooking with later, (t...